Standard Shower Valve Height? (Quick Answer & Adjustment Methods)
If you’re in the middle of overhauling your bathroom, one of the main factors to consider is plumbing. For that reason, it is important to consider the height requirements applicable to your shower, including the shower valve and showerhead, among others.
These rules are essential to understand if you’ve never put in an entirely new shower. If you’re searching for them, then you’re at the right spot. Today, we’ll look at what size you should look for when installing a new shower valve and what factors you must consider before fixing the valve in place.
What Is A Shower Valve?
Shower valves have two main functions. The first is to regulate the speed at which water flows from the showerhead, and the second one is to regulate the temperature of the water. There are many kinds of shower valves for homeowners to choose from, including the following three types:
1. Shower valve with thermostatic control
Have you ever taken a shower and then experienced an influx of hot, freezing cold, cold water that appeared out in the middle of nothing? It’s likely because someone else in your house is using water for another purpose as you shower.
The thermostatic shower valve eliminates the possibility of this being played out. Instead, you can choose the desired temperature and then leave it there for a long time with the assurance that it will not alter during the shower.
This shower valve is especially beneficial if you have small children. While you might be able to anticipate temperature variations that may occur, they aren’t as likely to be able to anticipate. They may get burned by an abrupt rush in boiling water.
2. Manual shower valve
This is among the most basic and outdated shower valves because it has only one handle that controls the temperature as well as the speed of water.
This shower valve is among the least expensive shower valve available, so if you’re searching for an option that is budget-friendly, then you should look no further. However, it comes with some limitations. Every time you step into the shower, you’ll need to find the perfect balance between temperature and speed and also prevent the abrupt temperature fluctuations we have mentioned earlier.
3. Digital shower valve
It is among the most recent shower valves and also one of the more expensive. With these kinds of valves, it is possible to modify the temperature and flow of water by using the electronic touchscreen.
The most appealing aspect of these valves is that you can set a temperature that you want to meet your needs instead of turning the knob back and forth until you get the temperature that you prefer.
What Is The Standard Shower Valve Height?
The ideal height for shower valves is determined by the shower you are using inside a bathtub or one that is free-standing (shower enclosure). If you’re showering inside a tub , then the normal height is 28 inches above the floor in the bathroom. In the event that you own a shower stall , the valve must be placed 48 inches above the floor.
The reason for the variation in height is because when your shower is situated within the tub, then the valve has to connect to the taps in the bath. The taps are somewhat low to the ground since they are inside the tub inside the bath.
If you’re in the shower stall, the valve won’t have to be connected to any other taps . it’s the standard height.
Furthermore, shower valves are made to be easily accessible and accessible. If you’re standing in a shower stall , it is not logical to bend your body down to 28 inches in order to be able to adjust your shower’s settings.
While the 48-inch height (4 feet) is the ideal level for most people to easily change settings.
The measurements of shower stall valves are only guidelines and can be altered in accordance with the needs of a family in terms of installation. For instance, if you have a family of tall individuals, you might be able to raise the elevation that the valve is by one foot.
What Is The Standard Showerhead Height?
Shower heads are a different aspect you should think about when you are putting the new valve for your shower. The standard shower head’s height is typically approximately 80 inches from the floor. However, this can differ from house to house.
For instance, the ceiling height in some houses is higher than in other homes, meaning you may not be able to reach 80 inches using the head of your shower. However, you could be in a home with tall people . This means that you need to raise the height higher than 80 inches.
Most plumbers suggest that you set 72 inches for a minimum height, regardless of the height or how small you may be, because any less than that will affect the direction and angle the water will flow out.
The height of your showerhead may influence the location you’d like to put the shower faucet. Some individuals set their valves halfway between their shower pan and showerhead. However, it’s not a major factor.
There are many different showerhead styles available at present. Here are some you can consider for your new showerhead:
The single-spray showerhead is the kind of showerhead that is standard in many homes. It is fixed in the wall and is mounted, and it is the least expensive shower head you can purchase. It’s not loaded with luxurious features; it simply does the basics well and, as a fundamental prerequisite, is all you require to have showerheads.
Showerheads that detach are fantastic because they function as a stationary shower heads that can be fixed to the wall or unhooked from the hook and placed on your body to get an even more thorough bath. They’re typically connected with flexible hoses, allowing you to move them around easily. The only drawback is that these hoses could get loose while they’re intended to be secured and spray your bathroom in a haze of water.
Shower heads that rain are generally set up on the ceiling and are angled downwards to the ceiling of the person taking a shower. It gives a rain-like experience, unlike an ordinary shower head mounted on the wall that shoots water at a diagonal angle. Showerheads with rainfall are more costly than single-spray or detachable heads, yet they offer a pleasant shower experience.
Showerheads with waterfalls are distinctive in that the water pouring out does not flow through tiny holes like normal showerheads. Instead, huge water swabs flow over the top of a fitted ledge. Although this is incredibly beneficial, it also uses lots of water and is, therefore, more costly in the longer term. This showerhead should be considered a second option if you can take a bath and should not be used as the principal showerhead.
How To Adjust Your Shower Valve Height
If you’ve put the shower valve, however, after a couple of showers, you realize that the height isn’t right, there are a few ways to make it adjustable. The most effective methods are like this:
1. Nail height adjustment
This method is good, but you’ll need to grind your valve down and replace the screws to install a new one. Replace the plate the valve was previously mounted on using an adjustable height plate specifically designed for the tap.
2. Adjustment of the height of the screw
Using this method will remove the valve just as you use the nail height adjustment technique. However, you will use the same screws that secured the valve to install the valve you are replacing. It is screwed in the same space that the original one was but in a way that it’s simple to adjust the height.
3. Self-cleaning mechanism
It is an adjustable shower valve that can move up and down based on the position of the shower head.
In conclusion, the height of the shower valve is set contingent upon various factors relating to plumbing and personal preference. First, it is based on whether you’re installing the valve to the bathtub or shower stall. Then the second factor is the height of you and others using the valve. We hope the info we’ve given you today will assist you in picking the right shower head and valve to complete your bathroom remodel.